Držáky a stativy

Univerzální, magnetický držák telefonu do mřížky ventilace automobilu. Tělo držáku je opatřeno kloubem s aretačním prstencem, díky kterému je možné držákem otáčet a nastavit tak jednoduše libovolný úhel. K držáku jsou přiloženy magnetické samolepky, které se umístí na zadní část telefonu, pro zajištění okamžitého uchycení k držáku. Technická data Umístění Ventilační mřížka automobilu Uchycení Pomocí magnetické samolepky Otočný Ano, kloubem

Baseus magnetický držák na palubní desku. Instalace držáku nikdy nebyla jednodušší. Strhněte pásku na spodní straně držáku a nalepte na libovolné místo ve voze a pod kryt telefonu vložte kovou destičku. Kovovou destičku lze také nalepit na záda telefonu, pokud kryt nepoužíváte. Telefon pak stačí jen přiložit a o vše ostatní se postará velmi silný magnet. Telefon tak bude držet na svém místě a to i na těch nejrozbitějších silnicích Držák je vyroben z hliníku v kombinaci s povrchem ze silikonu a je opatřen kloubem pro natočení do ideální pozice. Specifikace - Materiál Aluminum + silikon - Instalace na palubní desku pomocí oboustranné lepící pásky - Pro všechny rozměry telefonů - Velmi pevné uchycení - Snadná montáž - Minimalistický design

Baseus Gravity držák telefonu do auta pro montáž do výdechu ventilace. Díky systému uchycení s pojistkou a silnou pružinou držák nasuňte do mřížky ventilace. Uchycení telefonu obstará gravitace, telefon se vlastní hmotností uchytí a boční držáky se pevně sepnou. Žádné složité roztahování čelistí, telefon jen položíte nebo vyjmete a to vše jen a pouze jednou rukou. Držák je vybaven také kloubem pro natočení telefonu do ideální pozice. Specifikace - Materiál Plastic+TPE - Automatické uchycení telefonu vlastní vahou - Přísavka na sklo, ale i na povrchy jako je například palubní deska - Pro telefony s šířkou 63mm-88mm

Podložka vyrobená z protiskluzového materiálu, velikost 100 x 120 cm. Ideální do zavazadlového prostoru osobního automobilu. Díky velmi přilnavému povrchu zabraňuje volnému pohybu předmětů, které by jinak volně klouzaly. Velikost podložky lze jednoduše přizpůsobit zastřižením.

Silikonová podložka s velmi silnou přilnavostí i na šikmých plochách. Podložka má rozměry 11 x 18 cm s výšku okraje 1 cm. Plocha pro umístění předmětů má rozměry 10 x 17 cm a zajišťuje umístěné předměty před samovolným sklouznutím. Podložku využijete nejen ve vozidle, ale i doma, či v kanceláři pro umístění telefonu, klíčů, zapalovače a dalších drobností.Použitý materiál zároveň zajišťuje snadné a rychlé číštění. Technická data materiálsilikonodkládací plocha10 x 17 cmrozměry podložky11 x 18 x 1 cm

Držák, s extra silnou přísavkou, pro uchycení telefonu až do šířky (nebo výšky) 10 cm. Šířku lze zvětšit stisknutím bočního tlačítka, telefon se poté umístí do držáku a ten se poté zajistí stiskem čelistí. Díky uzamykatelnému otáčení o 360° a flexibilnímu ramenu držáku, je možné snadno nastavit vhodnou polohu telefonu. Telefon v klipsu pevně drží díky důmyslnému mechanismu, proti poškrábání je upnutý telefon chráněn pěnovými prvky. Technická data pro telefony do 10 cm (šířka nebo výška) nastavitelný úhel ano, 360° upevnění přísavka s aretací barva černá

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvatmavě šedá

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvachrom

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvazelená

Speciální nastavitelná patka s teleskopickým ramenem a přísavkou pro držáky telefonů řady LUKE. Patka je složena z masivní přísavky a úhlově nastavitelného, teleskopického ramene s šroubovacím zajištěním pozice. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Rameno lze nastavit v úhlu 180° a teleskopicky lze nastavit délku 11-16 cm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Držák Steel Cannon od Baseus lze umístit na jakýkoli typ ventilační mřížky. Držák samotný v místech, kde drží telefon, je pokrytý měkčeným materiálem, pro pevné uchycená bez strachu z poškrábání telefonu Pružinový mechanismus umožňuje umístit telefony o šířce 5,6 cm až 8,5 cm. Vlastnosti - Univerzální držák - Automaticky nastavitelný - Měkčený materiál pro spolehlivý úchop telefonu - Otočný o 360 stupňů - Pro zařízení o šířce 5,5 cm až 8,5 cm - Silné a stabilní uchopení telefonu

Praktický držák telefonu s nastavitelným ramenem a pogumovanými čelistmi pro upevnění.Do držáku je možné umístit telefon šíře 6,5 - 10 cm a je připevněn na kulovém kloubu jištěném maticí. Po povolení matice je možné nastavit libovolný sledovací úhel.Konstrukce je tvořena nastavitelným ramenem opatřeným dvěma klouby s ovládáním pomocí tlačítek. Tvar ramene lze jednoduše nastavit stisknutím tlačítek kloubů a uvolněním v požadované pozici, kde bude následně pevně aretován.Komplet držáku lze uchytit například na tyč hlavové opěrky, na zpětné zrcátko, na stůl a další podklady max. šíře/průměr 25 mm. Čelisti jsou opatřené gumovými vložkami, které brání poškození povrchu. Pro pevné uchycení pak slouží aretační prstenec ve spodní části, kde je navíc umístěn otočný prvek pro otáčení celého kompletu držáku.Technická datapro telefony (šířka)6,5 – 10 cmnastavitelný úhelano, 360°upevněnípomocí čelistí, max 25 mm

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu či navigace až do šířky (nebo výšky) 10 cm. Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu. Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.

Držák pro telefon k upevnění na opěrku hlavy.Rozsah úchytu pro telefon 5 - 9 cm. Díky těmto rozměrům, je možné použít tento držák pro většinu mobilních telefonů na trhu.Držák telefonu lze díky vysouvacímu ramenu úhlově nastavit a lze jím otáčet okolo osy tyčky hlavové opěrky. Držák lze na hlavové opěrce zajistit pomocí vrchního otočného prstence. Ovládání a sledování obrazu mobilního telefonu na zadním sedadle bude snadné a pohodlné i na dlouhých cestách. Držák je navíc opatřen výstupkem pro možnost uchycení tašky s lehkým obsahem. Technická data rozsah úchytu telefonu5-9 cmnastavitelný úhelano, pomocí rameneotočnéanozajištěníano, prstencem

Speciální patka s přísavkou a flexibilním ramenem pro držáky telefonů řady LUKE.Patka je složena z masivní přísavky a libovolně nastavitelného ramene. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm.Flexibilní rameno má délku 17 cm.Zakončení ramene je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvarůžově zlatá

Klasická patka s přísavkou pro držáky telefonů řady LUKE. Výška patky 8 cm. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Jedinečná podložka s velmi silnou přilnavostí, i na velmi šikmých plochách pevně drží a zajišťuje různé předměty před samovolným sklouznutím. Vysoké bočnice zadrží i rozměrnější předměty. Jedinečný tvar s výřezy na stranách umožňuje umístit telefon jako do držáku. Díky výřezům v horní i dolní části je možné položit telefon i s napájecím kabelem tak, že bočnice nepřekážejí.Pokud podložka časem díky prachu ztratí svou přilnavost, stačí ji jen omýt vlažnou vodou se saponátem a efekt přilnavosti bude obnoven.technická data: rozměry vnější10 x 15 x 2 cmrozměry vnitřní76 x 129 mmbarvačerná

Plastový držák mobilního telefonu s kovovým úchytem, určený k nalepení ve voze, nebo k připevnění na žebra ventilace automobilu. Nastavitelný úhel sklonu, nastavitelná šířka. Lze použít pro většinu běžně používaných mobilních telefonů. Barva imitace dřeva.

Materiál silicon, extrémně vysoké protiskluzové vlastnosti. Velikost cca 10 x 15 cm. Použitím protiskluzové položky lze položit i na šikmou plochu různé předměty, aniž by samovolně sklouzávaly. Barevné provedení: černá.

Speciální klipová patka pro držáky telefonů řady LUKE. Patka je složena z klipu šíře 2 cm s délkou 3 cm. Lze ji upevnit na hranu s max. výškou 1,5 cm a pomocí křídlaté matice zajistit. Tělo patky je v zadní části opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Speciální patka do mřížky ventilace pro držáky telefonů řady LUKE. Patka je složena ze dvou dílů. Háček jištěný posuvným členem s pružinou, pro zaháknutí za mřížku ventilace a samotný kloub s podpěrnou částí. Tyto díly stačí jednoduše zacvaknout do sebe a umístit na své místo. Tělo patky je dále opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

YENKEE YSM 610 Plně automatický držák do auta s certifikovaným bezdrátovým nabíjením Qi a podporou rychlého nabíjení o maximálním výkonu až 10W je vhodný do všech automobilů díky třem způsobům uchycení.

The Forcell HS4 car holder mounted to the air vent is designed for devices that support inductive charging, including the latest foldable Samsung Z Flip and Fold phone series. It allows you to charge them with a power of up to 15 W. The rotating swivel and automatically extending arms (after pressing a button) make it easy to mount the smartphone. Thanks to the Forcell holder, you will always have your phone at hand during any trip. Mount the device vertically or horizontally thanks to the 360° swivel and automatically extendable arms (after pressing a button). Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. Various adjustment options make it easy to adjust the holder to your own needs, which will be useful when several drivers share one car. The Forcell holder is suitable for both standard smartphones and those foldable from the latest Samsung Z Fold and Flip series. Moreover, it is mounted to the air vent, minimizing visibility problems and thus increasing safety while driving. At the same time, it supports wireless charging with a maximum power of 15 W. The set includes the 1 m charging cable with USB-C connectors. Specification:Mounting: air ventInput voltage: 5 V/2 A; 9 V/2 APower: 5 W/7.5 W/10 W/15 W (max.)Wireless charging distance: 6 mm (max.)Interface: USB-CCable: USB-C to USB-C (1 m)

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

LED lamp with a phone holder. Equipped with a wired control panel. It allows a wide range of changing the color in RGB mode (rainbow). It is an indispensable element of every streamer's stand. The ring light is used not only in the gaming world, but also in other areas of streaming. The accessory has a telephone holder attachment that allows the smartphone to be placed in the center of the illumination circle. Compactness, the ability to change the color of light, RGB mode and ideal lighting conditions will be appreciated by the content creators of such platforms as Tik Tok or Instagram. The LED lamp with a phone holder is also a perfect accessory for video meetings and online learning. Specification: Lamp diameter: 33 cm Product size: 31.5 × 32.2 × 3.3 cm Tripod height: 68–210 cm Material: aluminum alloy + ABS plastic + PP Light: white warm / RGB colors Light gear: white warm 10 gears / RGB 15 gears Color temperature: 2700–7000K LED bulbs: 120 + 39 RGB CRI: 80 Power: 12W Lumen rate: 900–1700 lm Working temperature: 45° Voltage: 5V/2–3A

LED lamp with a phone holder. It is an essential element of every streamer's stand. The ring light is used not only in the gaming world, but also in other areas of streaming. The accessory has a telephone holder attachment that allows the smartphone to be placed in the center of the circle lamp. Compactness, the ability to change the color of light and ideal lighting conditions will be appreciated by the content creators of platforms such as Tik Tok or Instagram. The LED lamp with a phone holder is also a perfect accessory for video meetings and online learning. Specification: Lamp diameter: 26 cm Tripod height: 9 cm Material: carbon steel + ABS plastic Light: warm / cool / white light Light gear: 9 Color temperature: 3000–6500 K LED bulbs: 120 Power: 8–10W Voltage: 5V/2A Lumen rate: 600–1300 lm

A gravitational car holder with a telescopic arm for a windshield, cockpit, board or other flat surface. The automatic mechanism allows easy and quick one-handed operation. Compatible with phones with a width of 65-82 mm. Due to the gravitational technology, the handle clamps automatically under the weight of the device inserted into it. A strong clamp ensures stabilization and safety of the phone even on a very difficult road. It does not require service every time you put down the phone or want to take it. You don't need to press any buttons or use your hands to stretch it. Thanks to the triangular mounting structure and the non-scratching silicone protection mat, the phone can be held firmly and securely while traveling. 360-degree adjustment allows you to set the phone in any position, depending on our convenience and preferences. The handle can be used many times. Before changing the place of installation, it is enough to rinse the suction cup with water, wait for it to dry and reattach. The holder has a dedicated hole for the charger cable, which you can easily connect while on the road. Thanks to its compact size and free choice of mounting, the handle does not distract and does not obstruct the view, ensuring full visibility. Specification: Material: Aluminum + ABS Type of assembly: clamping, gravity Weight: 192 g Mounting: suction cup (dashboard or windshield) Compatibility: phones with a width of 65-82 mm

Selfie stick with tripod function and wireless remote control. Perfect for photography fans. It helps to capture the most important moments in life. Made of high-quality, stainless steel and ABS, it guarantees long-term and safe use. The compact size and lightweight foldable design make it easy to carry and store the selfie stick. Adjustable length: the stick unfolds, so you can adjust its length to your individual needs. In addition, it has three fold-out legs that ensure stability and allow you to take pictures from a distance. The portable remote control allows you to take pictures without holding the stick. The product connects to the device via Bluetooth technology. Specification:Material: stainless steel + ABSSize: 70 x 45 x 295 mm (unfolded heigh: 1.57 m)Weight: 310 gSuitable for: 4.5-7 inch mobile phones (grip range: 60-95 mm)Connection: Bluetooth 4.0Wireless remote control: yes

Magnetic car holder with adjustable arm. It allows for comfortable and safe use of a smartphone while driving. Mounted on the windshield or dashboard. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. Adjustable angle of inclination of 240° allows you to adjust the parameters of the product to your own needs. An adjustable arm with a length of 11.7-16 cm enables precise adjustment of the position of the device within the line of sight. 360° rotation to change the position of the device for the convenience of its use, vertically or horizontally. A strong suction cup with a sticky gel ensures a stable fit on flat surfaces such as the windshield or dashboard. Set of two metal plates included.

HOCO car holder CA40 Cool journey was created for every driver and makes the car journeys safe and comfortable. Well-thought design of the product provides its easy use and allows to install it on the dashboard, as well as on the windshield. HOCO car holder CA40 is a modern device, very compact, so it does not take up the space. The product, thanks to its unique design, does not disturb the aesthetic appearance of the car’s interior, either. With the HOCO car holder CA40 you can easily have the phone calls during driving and enjoy your journey in safety. The product faces the different needs of every customer and allows you to install it on the vehicle dashboard or windshield. HOCO car holder CA40 was made of lightweight and solid materials, so it provides both, comfort and safety, and guarantees that your device will be holding still while you are driving. The product has a wide-range compatibility and can be used with 58mm-82mm (4-6.5 inch) smartphones and GPS devices. Specification: Material: ABS + PC Size: 105*50*80mm Weight: 70g

Car holder with wireless charging function of up to 15W. The built-in infrared sensor detects the device automatically. Mounted on the air vent. The intelligent infrared sensor detects the phone and the holder closes automatically. A firm fit ensures stabilization and safety of the phone even on uneven roads. After inserting the device, the wireless charging process will start automatically, which can reach a power of up to 15W. The 360-degree adjustment range allows you to adjust the parameters of the accessory to your own needs. Mounted to the air vent. Specification:Material: ABS + siliconeInput: 5V/2A, 9V/1,67AOutput power: 5W / 7.5 W / 10 W / 15W (15W only supports some LG phones)Fits: 4.5-7.0 inch cell phones (width: 63-100 mm)Place of installation: air ventSize: 74 × 120 × 108 mmWeight: 115 g

FORCELL CARBON H-CT322 car holder for the dashboard. It is a magnetic phone holder that increases the comfort of travel and makes using the phone easy and safe. 6 built-in magnets provide a firm grip, preventing the smartphone from falling out, and make the holder extremely universal; to use it, just place a metal plate on the phone or case. 360° rotation allows you to precisely adjust the position of the phone to your needs, horizontally or vertically. Cable clip allows you to place the cable in it so that it does not get tangled and does not interfere with your travels. Extremely compact: the small size of the product does not block the view to the road and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the air vent. It allows comfortable and safe use of a smartphone while driving. Small size does not block visibility. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. 360° rotation ensures precise adjustment of the phone position to your own needs. Extremely compact: the small size of the product ensures good visibility and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the ar vent - FORCELL CARBON B060. It allows for comfortable and safe use of a smartphone while driving. Built-in 4 magnets provide a firm grip, preventing the device from falling out while driving, and makes the handle extremely universal; to use it, place a metal plate on the device or a case. Compact size does not block visibility and makes it easy to store the product when not in use. Silicone inserts prevent scratching the air vent and protect the handle from falling out even on uneven roads. Set of two metal plates included.

The Forcell Bracket holder assures convenient and safe use of car navigation or smartphone when driving. 360-degree adjustment allows convenient horizontal or vertical positioning of the device. The holder is made of high-quality plastic, which guarantees durability and comfort of use. The inner side of clamps are coated with a material that protects the sides of the smartphone from scratches. The Forcell Bracket is equipped with clamps opening button and suction cup release button. Colour: Black Installation: Suction cup Max arms spacing: up to 95 mm Max arm length: 140 mm Rotation on the arm: 270 degree

Car holder with wireless charging. Mounted on the air vent. It allows you to safely use your smartphone while driving. Made of high-quality components it guarantees resistance to damage and affects long-term use. Allows wireless charging with a power up to 15 W. Compact, lightweight design makes it easy to store the product. SpecificationPower: 5 W/7.5 W/10 W/15 WMaterial: ABS + PCSize: 117 x 64 x 111 mmWeight: 108 gCompatibility: 4.5-7 inches phonesMounting location: air vent

Practical car holder designed to be mounted on the windshield or cockpit. It has an elegant design - the carbon motif makes your interior car luxurious.Universal useThe handle has a wide arm spacing (50-85 mm) and comes with devices with screen sizes from 3"- 6";.Highly adjustableThe handle has a 360 degree adjustment. Use the phone or navigate vertically or horizontally - as you like!Stable mountingThe handle is attached with a suction cup, which additionally has a locking clip. You can mount it to the windshield or the smooth surface of the dashboard. Silicone tabs protects against slipping out. The clamp release button makes it easy to remove the phone from the holder.Modern designThe Forcell HT1 handle is an accessory reminiscent of the futuristic carbon fiber. It looks great with the interior of a modern car.Features:Place of installation: windshield or dashboardRotation: 360 degreesCompatibility: 3"-6" devices

Motorbike holder with baffle. Fastened with a zipper. It ensures the safety of using the smartphone while riding a motorcycle or scooter. Mounted to the motorcycle frame. The product is compatible with 4.8-5.5″ mobile devices. Waterproof – allows you to use your smartphone in difficult conditions, protecting the device from moisture and flooding. Fastened with a zipper facilitates quick installation of the device in the holder. Damage resistant material reduces the risk of damage and scratches. Equipped with a baffle to protect against the sun for good visibility of the smartphone screen. Available in three sizes: 4.8-5.5″, 5.5-6.3″, 6.4-8.0″. Specification:Material: aluminum + iron + rubber + ABS + PVC + EVACompatibility: with 4.8-5.5″ mobile devices

Motorbike holder with baffle. Fastened with a zipper. It ensures the safety of using the smartphone while riding a motorcycle or scooter. Mounted to the motorcycle frame. The product is compatible with 5.5-6.3″ mobile devices. Waterproof – allows you to use your smartphone in difficult conditions, protecting the device from moisture and flooding. Fastened with a zipper facilitates quick installation of the device in the holder. Damage resistant material reduces the risk of damage and scratches. Equipped with a baffle to protect against the sun for good visibility of the smartphone screen. Available in three sizes: 4.8-5.5″, 5.5-6.3″, 6.4-8.0″. Specification:Material: aluminum + iron + rubber + ABS + PVC + EVACompatibility: with 5.5-6.3″ mobile devices

Baseus car holder for the air vent. It provides a strong fit, stabilization and safety of the phone even on a very difficult road. It has an improved clamp design on the air vent which makes installation even easier and makes the handle even more stable when attached. Compared to other handles, Easy Control does not use gravity to hold the device. The phone is blocked by hand – a strong clamp will keep the equipment in a stable position. Thanks to this solution, you can use the handle both in a vertical and horizontal position with one hand. To release the phone, simply press the orange button on the back of the holder. The transparent housing with metal arms provides a high-quality texture that matches the interior of cars. Abrasion-resistant silicone pads, inside the clamping arms, absorb pressure from braking and impacts to protect your phone. Mounting the handle does not distract and does not obstruct the view. It has a cutout for a cable that allows you to connect the charger even while driving. 360-degree adjustment allows you to set it in any position – depending on our convenience and preferences. Specification:Material: PC+ABSType of fastening: clampingPlace of installation: air ventCompatibility: 4.7"-6.7" mobile devices

FORCELL CARBON H-CF509 car holder for the air vent. It allows you to safely use your smartphone while driving. The unique roller system allows easy one-handed operation. Built-in rollers allow you to easily mount the device in the holder with only one hand. 360° rotation allows you to adjust the position of the device to the individual needs, vertically or horizontally. Silicone inserts prevent scratching the delicate casing of the device and prevent it from falling out. The adjustable knob allows you to increase or decrease the tightness of two small "clips" connecting the handle with the air vent, so we can be sure that the device will not fall out, no matter what the road is. The unique design with a carbon pattern makes the product look very elegant. Universal: the product is compatible with 4"-6.5" mobile devices.

Perfect for everyday driving - HOCO magnetic holder. It allows you to safely use your smartphone and navigation. Built-in magnets (6 pieces) ensure a secure grip, preventing the smartphone from falling out of the holder. It allows for easy installation both on the dashboard and on the windshield, whichever is more convenient. Made of light, solid materials, it ensures comfortable and safe use. The bracket sits firmly on the dashboard or windshield so it stays in the preferred position without disturbing your journey. 360 degree rotation allows you to adjust the product parameters to the supported device. Specification: Materials: PC + ABS + silicone Size: 65 * 110 * 160 mm Weight: 139 g Telescopic length: 61 x 41 x 32 mm

Gravity car holder. It allows you to comfortably operate your smartphone while driving. The product is extremely versatile and smoothly adapts to the shape of the device. Attached to the air vent. Made of high-quality components: aluminum, silicone and ABS, it ensures long-term and safe use, and is also resistant to damage. The compact design makes the product easy to store and does not block visibility. After removing the device, the holder returns to its original shape, but after placing the phone in it, its structure stretches and adjusts to the shape of the smartphone, providing a solid support point for the device. Anti-shock, modern design affects the comfortable use of the phone or navigation. A strong clamp ensures a stable fixation and protects against falling out. Specification: Material: ABS + aluminum alloy + silicone Size: 115 * 44 * 90 mm Weight: 47 g Suitable for: 4.5-7 inch mobile phones (width: 64-85 mm) Place of installation: air vent

Adjustable mobile phone holder - HOCO CA51. Allows you to comfortably operate your smartphone while driving. The product is extremely universal and smoothly adapts to the shape of the device. Attached to the ventilation grille. Made of high quality components - silicone + ABS, ensures long-term and safe use, and is resistant to damage. Compact design makes the product easy to store and does not block visibility while driving. After pulling out the device the handle returns to its original shape, but after placing the phone in it its design stretches and adapts to the shape of the smartphone. Anti-shock, modern design affects the comfortable use of the phone or navigation. Strong clamp ensures stable attachment of the device to the handle and protects it from falling out. Silicone pad does not damage the car grill. 360-degree rotation allows you to accurately adjust the device parameters to your individual needs. Specification: Materials: ABS + silicone Size: 130 * 50 * 80 mm Weight: 52g Versatility: mobile phones 4 "-6.5" Mounting location: air outlet

Gravity car mount to the air outlet. Perfect for devices with a width of 63mm to 88mm and a thickness of up to 11mm. 360-degree adjustment and easy assembly makes trouble free in daily use. Horizontal Flat Structure: The horizontal telescopic design will extend automatically when putting down a phone and retract when picking it up. Gravity Ganged: The clamp extends and retracts automatically with the gravity of a phone and firmly fixes the phone. Metal Design: The new bright matte metal is unfading, beautiful and more durable. Not Block Air Outlets: It is applicable to all types of vehicles without blocking the vision and air outlets, plug-and-play. Rubber caps on the jaws to ensure a solid installation without scratching the air outlet. The set includes stickers that you can use to decorate the handle. Features:Material: PC +TPEFixing: air outletCompatibility: devices with a width of 63mm to 88mm and a thickness of up to 11mm. 

Gravity car holder. It allows you to comfortably use the phone while traveling in a car, affecting driving safety. Does not require adjusting to phone size. Made of high quality materials - PC and silicone, it guarantees long-term and safe use. Automatic jaws do not need to be adjusted to the phone and close automatically when the device is placed on the accessory. The triangular structure ensures stability while driving even on uneven roads, reducing the risk of the device falling out. Universal: the product can be mounted both on the dashboard of the car and on the windshield. Strong suction cup is reusable - just rinse it with water to regain its strong suction properties. 360-degree rotating head allows you to adjust the parameters to the individual preferences of the user. Specification: Materials: PC + silicone Size: 18.5 x 11.6 x 9 cm Weight: 72 g Compatibility: devices with a width of 6.3 - 8.5 cm and a thickness of not more than 1 cm

HOCOmagnetic holder. It allows you to safely use your smartphone while driving. It is extremely versatile, it can be used with almost any device on the market. Built-in magnets (6 pieces) ensure a secure grip, preventing the smartphone from falling out of the holder. The special design allows easy installation in the air vent. Made of light, solid materials, it ensures comfortable and safe use. The fixing is twisted, which ensures a secure installation in the air vent. The mounts on the side of the handle allow the cable to be hooked. 360-degree rotation allows you to adjust the product parameters to the supported device. Specification: Material: PC, ABS, silicone Size: 75 x 57 x 43 mm Weight: 66 g Load range: 2 kg Place of installation: air vent

Gravity handle for the air vent. It allows you to use your smartphone safely while traveling. Butterfly construction smoothly adapts to the shape of the device; the handle closes automatically when the device rests on it, and the side arms clamp under the weight of the phone. Equipped with a ball joint: allows you to adjust the product parameters to the driver's needs even better. Mounted to the air vent using a clip with a strong clamping spring. Designed for mobile devices with a screen size 3.5 "-6.5". Has a textured and polished structure, which makes it nice to touch. Specification: Material: ABS + PC + aluminum alloy + silicone Size: 91 * 90 * 95 mm Weight: 61g Mounting range: 60-85 mm

A light, compact HOCO car holder mounted on a air-vent. Wide-range adjustable makes you can use it with 55mm-82mm (3.5-6 inch) smartphones and GPS devices. It allows convenient and safe use of the smartphone while traveling. 360° rotatable head allows you to set the phone in a preferred position. A strong suction cup with an additional clamp clip makes the holder firmly attached to the air vent. The holder has elements stabilizing the phone on the arms and on the part of the handle adjacent to the back of the device. The adjustable arm allows you to adjust the clamp of the holder to the size of the display. The holder supports devices with a screen size of 3.5-6". The holder is made of durable PC and PVC- lightweight and solid materials which offer a comfortable touching experience. The aesthetic appearance makes the holder look good in your car’s interior. Reach of the clamping arms: 55-82mm (3.5-6") Material: PC+PVC Dimensions: 80*69*34mm Weight: 41.6g Box: Original HOCO box with eurohole

Universal car holder with modern design and high functionality. Allows easy use of the phone or navigation while driving providing security for driver and passengers. Adjustable handle allows to place it in the most optimal place for the eyes and hands of the driver. This enables convenient use of GPS navigation, notifications and other functionalities while driving, ensuring the safety of the driver and passengers. The handle is made of high quality materials that ensures durability and comfortable use. The kit includes mounting arm with a strong suction cup that makes the device can be firmly attached to the windscreen. The suction cup is reusable: simply wash it to be ready for reuse. Colour: White Width: 55-95 mm Arm length: 10 cm

Car holder designed for mounting to the air vent. It allows you to safely use your smartphone while driving. Universal: suitable for smartphones with a screen diagonal of 4.5-7″, has an automatic, adjustable clamp in the range 60-81 mm Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Compatibility: smartphones with a screen diagonal of 4.5-7″Clamp range: 60-81mmMaterial: ABS + aluminum alloy + siliconeSize: 79 * 37.5 * 10 mmWeight: 55 g

Compact, magnetic car holder for the air vent. Excellent visibility while drivingCompact size and convenient installation to the air vent does not block visibility. Using the handle does not obstruct the air flow from the air vent. Strong adhesionFour strong magnesia ensure a stable adhesion. Even on bumpy roads, the smartphone will not fall out of the holder. One- hand operationYou can mount the smartphone in the holder with one hand. MaterialsThe gadget's jaws are lined with flexible TPU, which prevents the airflow grille from scratching. Features:Fixing: air outlet Compatibility: universal

Ensure a safe ride with the car gravity holder Bad Bear. The wide arm spacing guarantees compatibility with many devices, and a 360° rotation enables adjustment to individual needs. The built-in legs prevent the device from accidentally slipping. Mounting to the air vent. The durable, triangular construction enables mounting the device vertically—side buttons, charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. A 360° rotation allows you to turn the holder to obtain the right angle for your eyesight and follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Made of a high-quality ABS, aluminum alloy, and silicon holder ensures durability and comfort of use. A solid clamping to the air vent guarantees that the device will stay in place and not be damaged even on bumpy roads. Specification:Color: BlackMaterial: ABS + SiliconWeight: 50 gSize: 120 × 112 × 49 mmCompatibility: Devices 4–7"Adjustment: 360° rotationMounting place: Air vent 

Magnetic car holder designed for mounting to the air vent. It allows you to safely use your smartphone (4.5-7'') while driving. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Material: ABS + siliconeSize: 72 x 46 x 32 mmWeight: 65 g

Magnetic car holder designed for mounting to the dashboard. It allows you to safely use your smartphone while driving. Made of high quality materials, provides resistance to damage and long-term use. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Mounting: dashboardMaterial: ABS + PC + siliconeSize: 185 x 75 x 125 mmWeight: 170 g

Magnetic car holder designed for mounting to the dashboard. It allows you to safely use your smartphone while driving. Made of high quality materials, provides resistance to damage and long-term use. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Mounting: dashboardMaterial: ABS + PC + siliconeSize: 185 x 75 x 125 mmWeight: 170 g

Compact magnetic car holder mounted to the dashboard. Makes it easier to use smartphone navigation while driving. Universal: in order to take advantage of the magnetic properties of the holder, you just need to put a metal plate on the device or its case. Made of durable materials, it guarantees resistance to damage, allowing the user to enjoy the product's capabilities for longer. Small size does not block visibility, and also makes it easy to put it in the glove box after the trip. Built-in magnet provides a firm grip, stabilizing the device while driving on uneven surfaces.