Držáky a stativy

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvazelená

Speciální nastavitelná patka s teleskopickým ramenem a přísavkou pro držáky telefonů řady LUKE. Patka je složena z masivní přísavky a úhlově nastavitelného, teleskopického ramene s šroubovacím zajištěním pozice. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Rameno lze nastavit v úhlu 180° a teleskopicky lze nastavit délku 11-16 cm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Praktický držák telefonu s nastavitelným ramenem a pogumovanými čelistmi pro upevnění.Do držáku je možné umístit telefon šíře 6,5 - 10 cm a je připevněn na kulovém kloubu jištěném maticí. Po povolení matice je možné nastavit libovolný sledovací úhel.Konstrukce je tvořena nastavitelným ramenem opatřeným dvěma klouby s ovládáním pomocí tlačítek. Tvar ramene lze jednoduše nastavit stisknutím tlačítek kloubů a uvolněním v požadované pozici, kde bude následně pevně aretován.Komplet držáku lze uchytit například na tyč hlavové opěrky, na zpětné zrcátko, na stůl a další podklady max. šíře/průměr 25 mm. Čelisti jsou opatřené gumovými vložkami, které brání poškození povrchu. Pro pevné uchycení pak slouží aretační prstenec ve spodní části, kde je navíc umístěn otočný prvek pro otáčení celého kompletu držáku.Technická datapro telefony (šířka)6,5 – 10 cmnastavitelný úhelano, 360°upevněnípomocí čelistí, max 25 mm

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu či navigace až do šířky (nebo výšky) 10 cm. Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu. Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.

Držák pro telefon k upevnění na opěrku hlavy.Rozsah úchytu pro telefon 5 - 9 cm. Díky těmto rozměrům, je možné použít tento držák pro většinu mobilních telefonů na trhu.Držák telefonu lze díky vysouvacímu ramenu úhlově nastavit a lze jím otáčet okolo osy tyčky hlavové opěrky. Držák lze na hlavové opěrce zajistit pomocí vrchního otočného prstence. Ovládání a sledování obrazu mobilního telefonu na zadním sedadle bude snadné a pohodlné i na dlouhých cestách. Držák je navíc opatřen výstupkem pro možnost uchycení tašky s lehkým obsahem. Technická data rozsah úchytu telefonu5-9 cmnastavitelný úhelano, pomocí rameneotočnéanozajištěníano, prstencem

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvarůžově zlatá

Klasická patka s přísavkou pro držáky telefonů řady LUKE. Výška patky 8 cm. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Jedinečná podložka s velmi silnou přilnavostí, i na velmi šikmých plochách pevně drží a zajišťuje různé předměty před samovolným sklouznutím. Vysoké bočnice zadrží i rozměrnější předměty. Jedinečný tvar s výřezy na stranách umožňuje umístit telefon jako do držáku. Díky výřezům v horní i dolní části je možné položit telefon i s napájecím kabelem tak, že bočnice nepřekážejí.Pokud podložka časem díky prachu ztratí svou přilnavost, stačí ji jen omýt vlažnou vodou se saponátem a efekt přilnavosti bude obnoven.technická data: rozměry vnější10 x 15 x 2 cmrozměry vnitřní76 x 129 mmbarvačerná

Plastový držák mobilního telefonu s kovovým úchytem, určený k nalepení ve voze, nebo k připevnění na žebra ventilace automobilu. Nastavitelný úhel sklonu, nastavitelná šířka. Lze použít pro většinu běžně používaných mobilních telefonů. Barva imitace dřeva.

Materiál silicon, extrémně vysoké protiskluzové vlastnosti. Velikost cca 10 x 15 cm. Použitím protiskluzové položky lze položit i na šikmou plochu různé předměty, aniž by samovolně sklouzávaly. Barevné provedení: černá.

Speciální klipová patka pro držáky telefonů řady LUKE. Patka je složena z klipu šíře 2 cm s délkou 3 cm. Lze ji upevnit na hranu s max. výškou 1,5 cm a pomocí křídlaté matice zajistit. Tělo patky je v zadní části opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Speciální patka do mřížky ventilace pro držáky telefonů řady LUKE. Patka je složena ze dvou dílů. Háček jištěný posuvným členem s pružinou, pro zaháknutí za mřížku ventilace a samotný kloub s podpěrnou částí. Tyto díly stačí jednoduše zacvaknout do sebe a umístit na své místo. Tělo patky je dále opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

A car holder with wireless charging. Automatically detects which smartphone is placed in the holder to ensure maximum watts of charge. Intelligent infrared sensor detects the phone, thanks to which the holder automatically closes. The firm fit ensures stabilization and safety of the phone even on uneven roads. After inserting, the wireless charging process will start, which can reach 15W. The holder will automatically detect which smartphone is placed in the holder to ensure maximum watts of charge. Supports Android fast charging up to 10W/15W. Can be charged in a case. LED backlight on the frame informing about the charging status. Large 360 ??degree adjustment range. The triangular design of the device allows for full phone stabilization. Soft silicone in the contact areas with the phone for the safety of devices. The set includes a double mounting system for a ventilation grille or cockpit / glass. Specification: Finish: PC, silicone Type of fastening: clamping Place of installation: air conditioning grille / cockpit / glass Compatibility: devices with a width of 55-92 mm Power: 5W 7.5W 10W 15W

The Forcell HS4 car holder mounted to the air vent is designed for devices that support inductive charging, including the latest foldable Samsung Z Flip and Fold phone series. It allows you to charge them with a power of up to 15 W. The rotating swivel and automatically extending arms (after pressing a button) make it easy to mount the smartphone. Thanks to the Forcell holder, you will always have your phone at hand during any trip. Mount the device vertically or horizontally thanks to the 360° swivel and automatically extendable arms (after pressing a button). Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. Various adjustment options make it easy to adjust the holder to your own needs, which will be useful when several drivers share one car. The Forcell holder is suitable for both standard smartphones and those foldable from the latest Samsung Z Fold and Flip series. Moreover, it is mounted to the air vent, minimizing visibility problems and thus increasing safety while driving. At the same time, it supports wireless charging with a maximum power of 15 W. The set includes the 1 m charging cable with USB-C connectors. Specification:Mounting: air ventInput voltage: 5 V/2 A; 9 V/2 APower: 5 W/7.5 W/10 W/15 W (max.)Wireless charging distance: 6 mm (max.)Interface: USB-CCable: USB-C to USB-C (1 m)

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

LED lamp with a phone holder. It is an essential element of every streamer's stand. The ring light is used not only in the gaming world, but also in other areas of streaming. The accessory has a telephone holder attachment that allows the smartphone to be placed in the center of the circle lamp. Compactness, the ability to change the color of light and ideal lighting conditions will be appreciated by the content creators of platforms such as Tik Tok or Instagram. The LED lamp with a phone holder is also a perfect accessory for video meetings and online learning. Specification: Lamp diameter: 26 cm Tripod height: 9 cm Material: carbon steel + ABS plastic Light: warm / cool / white light Light gear: 9 Color temperature: 3000–6500 K LED bulbs: 120 Power: 8–10W Voltage: 5V/2A Lumen rate: 600–1300 lm

Selfie stick with tripod function and wireless remote control. Perfect for photography fans. It helps to capture the most important moments in life. Made of high-quality, stainless steel and ABS, it guarantees long-term and safe use. The compact size and lightweight foldable design make it easy to carry and store the selfie stick. Adjustable length: the stick unfolds, so you can adjust its length to your individual needs. In addition, it has three fold-out legs that ensure stability and allow you to take pictures from a distance. The portable remote control allows you to take pictures without holding the stick. The product connects to the device via Bluetooth technology. Specification:Material: stainless steel + ABSSize: 70 x 45 x 295 mm (unfolded heigh: 1.57 m)Weight: 310 gSuitable for: 4.5-7 inch mobile phones (grip range: 60-95 mm)Connection: Bluetooth 4.0Wireless remote control: yes

The Forcell Chrom III car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a long arm with 360° rotation enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically or horizontally—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (40–110 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. The long arm with 360° rotation allows you to turn the holder to obtain the right angle for your eyesight. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder that has chrome, aesthetic inserts gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 40–110 mmArm length: 150 mm

The Forcell Oval car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a long arm, flexible arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable oval construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. A very long arm (27 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 270 mm The offer also includes a model with a 17 cm long arm and a model with mounting only to the air vent.

Magnetic car holder with adjustable arm. It allows for comfortable and safe use of a smartphone while driving. Mounted on the windshield or dashboard. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. Adjustable angle of inclination of 240° allows you to adjust the parameters of the product to your own needs. An adjustable arm with a length of 11.7-16 cm enables precise adjustment of the position of the device within the line of sight. 360° rotation to change the position of the device for the convenience of its use, vertically or horizontally. A strong suction cup with a sticky gel ensures a stable fit on flat surfaces such as the windshield or dashboard. Set of two metal plates included.

The Forcell Regular car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. Folding bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

The Forcell Oval car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable oval construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

The Forcell Bracket holder assures convenient and safe use of car navigation or smartphone when driving. It has a adjustable arm that allows positioning the holder at different angles. The Forcell Bracket holder with a strong suction cup has high ranges of the adjustments. A long adjustable arm and rotation up to 360 degrees on a ball joint allow positioning the device to your needs. The holder is made of high-quality plastic, which guarantees durability and comfort of use. The inner side of clamps are coated with a material that protects the sides of the smartphone from scratches. The handle is equipped with clamps opening button and suction cup release button. Colour: Black Installation: Suction cup Max arms spacing: up to 95 mm Max arm length: 140 mm Rotation on the arm: 270 degree

FORCELL CARBON H-CT322 car holder for the dashboard. It is a magnetic phone holder that increases the comfort of travel and makes using the phone easy and safe. 6 built-in magnets provide a firm grip, preventing the smartphone from falling out, and make the holder extremely universal; to use it, just place a metal plate on the phone or case. 360° rotation allows you to precisely adjust the position of the phone to your needs, horizontally or vertically. Cable clip allows you to place the cable in it so that it does not get tangled and does not interfere with your travels. Extremely compact: the small size of the product does not block the view to the road and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the air vent. It allows comfortable and safe use of a smartphone while driving. Small size does not block visibility. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. 360° rotation ensures precise adjustment of the phone position to your own needs. Extremely compact: the small size of the product ensures good visibility and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the ar vent - FORCELL CARBON B060. It allows for comfortable and safe use of a smartphone while driving. Built-in 4 magnets provide a firm grip, preventing the device from falling out while driving, and makes the handle extremely universal; to use it, place a metal plate on the device or a case. Compact size does not block visibility and makes it easy to store the product when not in use. Silicone inserts prevent scratching the air vent and protect the handle from falling out even on uneven roads. Set of two metal plates included.

Elegant gravity air vent car holder. Curved tempered glass panel gives them a futuristic design. Easy to one-hand operation. Thanks to the auto clip, you only have to put the phone inside and the clips automatically suit to your phone. Wide clips offer a steady grip without phone shaking. The inner clip is protected with silicone material that can prevent minor scratches on the phone cover. The holder is fully adjustable - offers full 360 view with easy 90 horizontal and vertical angle rotations. Easy access to home button and charging port makes easy charging them during travel. Key features: - gravity technology (auto clip) - triangular anti-shock design - 360-degree full viewing angle - taking/ placing with one hand - elastic silicone soft pads Specification: Install way: air outlet (compatible with 98% of car air vent types) Material: glass + aluminium alloy Size: 9,8 x 5,2 x 3,2 cm Weight: 85 g Technology: Oxidation Compatibility: devices with 4-6 inches screens and 1,1 cm thickness max Package type: box

Motorbike holder with baffle. Fastened with a zipper. It ensures the safety of using the smartphone while riding a motorcycle or scooter. Mounted to the motorcycle frame. The product is compatible with 4.8-5.5″ mobile devices. Waterproof – allows you to use your smartphone in difficult conditions, protecting the device from moisture and flooding. Fastened with a zipper facilitates quick installation of the device in the holder. Damage resistant material reduces the risk of damage and scratches. Equipped with a baffle to protect against the sun for good visibility of the smartphone screen. Available in three sizes: 4.8-5.5″, 5.5-6.3″, 6.4-8.0″. Specification:Material: aluminum + iron + rubber + ABS + PVC + EVACompatibility: with 4.8-5.5″ mobile devices

FORCELL CARBON H-CF509 car holder for the air vent. It allows you to safely use your smartphone while driving. The unique roller system allows easy one-handed operation. Built-in rollers allow you to easily mount the device in the holder with only one hand. 360° rotation allows you to adjust the position of the device to the individual needs, vertically or horizontally. Silicone inserts prevent scratching the delicate casing of the device and prevent it from falling out. The adjustable knob allows you to increase or decrease the tightness of two small "clips" connecting the handle with the air vent, so we can be sure that the device will not fall out, no matter what the road is. The unique design with a carbon pattern makes the product look very elegant. Universal: the product is compatible with 4"-6.5" mobile devices.

Universal car holder for a smartphone. Can be mounted to the windshield or dashboard.  The handle allows convenient use of, among others smartphone navigation while traveling. Extendable clamps, a long adjustable arm with 360 degrees of rotation, and positioning the smartphone vertically or horizontally allow you to adjust your smartphone to individual needs. Convenient installation on the windshield or dashboard does not limit visibility while driving. Specification: Model: ZP-X0566Compatibility: devices with 4.7–6.8" screenArm spacing: 54.0–94.9 mmInstallation: windshield, dashboard (suction cup)Material: PC + ABS + steel + siliconeWeight: 280 g

Universal car holder mounted to the dashboard or windshield. Adjustable arm with a movable head with a range of 360° movement allows you to perfectly adjust the position of the device to your needs, vertically or horizontally. An extendable, adjustable arm with a movable head allow you to set the accessory and the device mounted in it according to your preferences, vertically or horizontally - so as not to block visibility and be able to comfortably use navigation. The suction cup allows the mount to be attached to the dashboard or windshield. Special inserts on the clamps protect the device from scratching while traveling. Specification: Material: ABS + silicone Size: 165 * 105 * 120 mm Weight: 170 g Grip range: 62-95 mm Suitable for: 4.5-7 inch phones

Gravity car holder. It allows you to comfortably operate your smartphone while driving. The product is extremely versatile and smoothly adapts to the shape of the device. Attached to the air vent. Made of high-quality components: aluminum, silicone and ABS, it ensures long-term and safe use, and is also resistant to damage. The compact design makes the product easy to store and does not block visibility. After removing the device, the holder returns to its original shape, but after placing the phone in it, its structure stretches and adjusts to the shape of the smartphone, providing a solid support point for the device. Anti-shock, modern design affects the comfortable use of the phone or navigation. A strong clamp ensures a stable fixation and protects against falling out. Specification: Material: ABS + aluminum alloy + silicone Size: 115 * 44 * 90 mm Weight: 47 g Suitable for: 4.5-7 inch mobile phones (width: 64-85 mm) Place of installation: air vent

Gravity car mount to the air outlet. Perfect for devices with a width of 63mm to 88mm and a thickness of up to 11mm. 360-degree adjustment and easy assembly makes trouble free in daily use. Horizontal Flat Structure: The horizontal telescopic design will extend automatically when putting down a phone and retract when picking it up. Gravity Ganged: The clamp extends and retracts automatically with the gravity of a phone and firmly fixes the phone. Metal Design: The new bright matte metal is unfading, beautiful and more durable. Not Block Air Outlets: It is applicable to all types of vehicles without blocking the vision and air outlets, plug-and-play. Rubber caps on the jaws to ensure a solid installation without scratching the air outlet. The set includes stickers that you can use to decorate the handle. Features:Material: PC +TPEFixing: air outletCompatibility: devices with a width of 63mm to 88mm and a thickness of up to 11mm. 

Gravity car holder. It allows you to comfortably use the phone while traveling in a car, affecting driving safety. Does not require adjusting to phone size. Made of high quality materials - PC and silicone, it guarantees long-term and safe use. Automatic jaws do not need to be adjusted to the phone and close automatically when the device is placed on the accessory. The triangular structure ensures stability while driving even on uneven roads, reducing the risk of the device falling out. Universal: the product can be mounted both on the dashboard of the car and on the windshield. Strong suction cup is reusable - just rinse it with water to regain its strong suction properties. 360-degree rotating head allows you to adjust the parameters to the individual preferences of the user. Specification: Materials: PC + silicone Size: 18.5 x 11.6 x 9 cm Weight: 72 g Compatibility: devices with a width of 6.3 - 8.5 cm and a thickness of not more than 1 cm

Gravity handle for the air vent. It allows you to use your smartphone safely while traveling. Butterfly construction smoothly adapts to the shape of the device; the handle closes automatically when the device rests on it, and the side arms clamp under the weight of the phone. Equipped with a ball joint: allows you to adjust the product parameters to the driver's needs even better. Mounted to the air vent using a clip with a strong clamping spring. Designed for mobile devices with a screen size 3.5 "-6.5". Has a textured and polished structure, which makes it nice to touch. Specification: Material: ABS + PC + aluminum alloy + silicone Size: 91 * 90 * 95 mm Weight: 61g Mounting range: 60-85 mm

A light, compact HOCO car holder mounted on a air-vent. Wide-range adjustable makes you can use it with 55mm-82mm (3.5-6 inch) smartphones and GPS devices. It allows convenient and safe use of the smartphone while traveling. 360° rotatable head allows you to set the phone in a preferred position. A strong suction cup with an additional clamp clip makes the holder firmly attached to the air vent. The holder has elements stabilizing the phone on the arms and on the part of the handle adjacent to the back of the device. The adjustable arm allows you to adjust the clamp of the holder to the size of the display. The holder supports devices with a screen size of 3.5-6". The holder is made of durable PC and PVC- lightweight and solid materials which offer a comfortable touching experience. The aesthetic appearance makes the holder look good in your car’s interior. Reach of the clamping arms: 55-82mm (3.5-6") Material: PC+PVC Dimensions: 80*69*34mm Weight: 41.6g Box: Original HOCO box with eurohole

Magnetic car holder designed for mounting to the air vent. It allows you to safely use your smartphone while driving. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Material: PC + ABS + siliconeSize: 64 * 42 * 61 mmWeight: 49 g

Compact, magnetic car holder for the air vent. Excellent visibility while drivingCompact size and convenient installation to the air vent does not block visibility. Using the handle does not obstruct the air flow from the air vent. Strong adhesionFour strong magnesia ensure a stable adhesion. Even on bumpy roads, the smartphone will not fall out of the holder. One- hand operationYou can mount the smartphone in the holder with one hand. MaterialsThe gadget's jaws are lined with flexible TPU, which prevents the airflow grille from scratching. Features:Fixing: air outlet Compatibility: universal

Universal car holder with modern design and high functionality. It allows to use the phone easily and it ensures security of the driver and the passengers. Adjustable handle permits to put it on the most optimal place for drivers. This holder is made of high quality material, which guarantee durability and comfort of using. The set includes adjustable arm with a strong suction cup, which lets it be fastened to the screen or the dashboard. The suction cup is reusable: you should only wash it and use again. Colour: Black

Ensure a safe ride with the car gravity holder Bad Bear. The wide arm spacing guarantees compatibility with many devices, and a 360° rotation enables adjustment to individual needs. The built-in legs prevent the device from accidentally slipping. Mounting to the air vent. The durable, triangular construction enables mounting the device vertically—side buttons, charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. A 360° rotation allows you to turn the holder to obtain the right angle for your eyesight and follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Made of a high-quality ABS, aluminum alloy, and silicon holder ensures durability and comfort of use. A solid clamping to the air vent guarantees that the device will stay in place and not be damaged even on bumpy roads. Specification:Color: BlackMaterial: ABS + SiliconWeight: 50 gSize: 120 × 112 × 49 mmCompatibility: Devices 4–7"Adjustment: 360° rotationMounting place: Air vent 

A modern car holder with a double fixing, mounted to the air vent. It can be rotated freely - using the screen horizontally or vertically. Compact size, 360-degree adjustment and easy installation. Strong high strength spring steel inside keeps your phone safe and stable. A special design eliminates the noise - so annoying in the gravity handles. Thanks to its compact size and mounting on the air vent, the handle does not distract and does not obstruct the view, ensuring full visibility. The special design allows it to be attached to a horizontal, vertical or diagonal ventilation hole. The contact point with the phone has a soft silicone pad for the best protection of the device. The accessory is stable and well held. It does not leave any traces, scratches or splinters. Made of high-quality aluminum alloy resistant to oxidation, corrosion and durable in use, it ensures reliable durability of the accessory. Specification: Material: ABS, Aluminum, Silicone Type of assembly: clamped Mounting: air vent Compatibility: phones 4.7'' - 6.5'' (55-84 mm wide)

Magnetic car holder designed for mounting to the dashboard. It allows you to safely use your smartphone while driving. Made of high quality materials, provides resistance to damage and long-term use. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Mounting: dashboardMaterial: ABS + PC + siliconeSize: 185 x 75 x 125 mmWeight: 170 g

Magnetic car holder designed for mounting to the dashboard. It allows you to safely use your smartphone while driving. Made of high quality materials, provides resistance to damage and long-term use. Universal: just install a thin metal plate between the phone and the phone housing to use the product. High magnetic force provides a firm grip, preventing the device from falling out. Small size does not block visibility and prevents the product from taking up a lot of space. Specification:Mounting: dashboardMaterial: ABS + PC + siliconeSize: 185 x 75 x 125 mmWeight: 170 g

Compact magnetic car holder mounted to the dashboard. Makes it easier to use smartphone navigation while driving. Universal: in order to take advantage of the magnetic properties of the holder, you just need to put a metal plate on the device or its case. Made of durable materials, it guarantees resistance to damage, allowing the user to enjoy the product's capabilities for longer. Small size does not block visibility, and also makes it easy to put it in the glove box after the trip. Built-in magnet provides a firm grip, stabilizing the device while driving on uneven surfaces.

Universal Hoco car holder mounted on the air vent. Arm with a movable head with a range of 360° movement allows you to perfectly adjust the position of the device to your needs, vertically or horizontally. Arm with a movable head allow you to set the accessory and the device mounted in it according to your preferences, vertically or horizontally – so as not to block visibility and be able to comfortably use navigation. Mounted on the air vent it allows you to safely use your smartphone while driving. Special inserts on the clamps protect the device from scratching while traveling. Specification:Mounting location: air ventPhone mount: clampsMaterial: ABS + siliconeSize: 105 x 110 x 114 mmWeight: 77 gGrip range: 60-85 mmSuitable for: 4.5-7 inch phones

Magnetic car holder for the air vent. It allows for comfortable use of a smartphone while driving. The built-in magnet provides a firm grip, preventing the device from falling out while driving, and makes the holder extremely universal; to use it, just place a metal plate on the device or a case. The compact size does not block visibility and makes the holder easy to store when not in use. Silicone inserts prevent the air vent from scratching. Specification: Material: ABS + silicone + metal alloy + magnet Size: 41 * 38 * 73mm Weight: 34.2 g Load capacity: 700 g Place of installation: air vent

Universal car holder for mobile phones and other devices with the place where any photo can be put. Thanks to the solid construction it ensures safe using during the driving. The holder has a flexible arch (17 cm) and a suction cup fixing it to the glass. It let you regulate stiff side, adapting it to the size of the device. The place for a photo, makes it unique and original, allows to personalize the device.

Universal car holder SILK suits popular smartphones on the market. It not only keeps the device steadily but also needs a little of place. The Silk car holder is made of the highest quality materials. It is very simply in installation – just put it to the ventilation. It stands out with durable construction and 360 degree regulation of rotation, which allows optimum placing. The car holder has also got adjustment of the width – it is compatible with devices with diagonal of screen from 4.7” to 6”.

AIR OUTLET magnetic car holder. Makes using the phone easier while driving, making the journey comfortable and safe. Magnetic - allows the device to be securely attached to the mount, preventing it from falling out even on uneven roads. The built-in L-shaped clip allows the grille handle to be easily installed, and also provides a firm grip. 360 degree rotation allows you to adjust the product parameters to the individual needs. Does not limit the functionality of the phone - the holder provides free use of the smartphone while driving, allowing you to use the navigation, receive calls or play music - all with just one hand. Silicone pad inside the clip prevents scratches on the air vent outlet. The compact size and lightweight design means that the holder does not take up a lot of space and is also easy to store. Made of high quality materials, guarantees long-term and safe use. Built-in magnets (5) allow the device to be securely attached, regardless of its position. Universal - just install a special metal plate on your phone or case to be able to use the magnetic properties of the holder. Wide compatibility - a product compatible with most car air vents. Modern, minimalist design does not disturb the aesthetics of the car interior. Specification: Mounting place: air vent

A small gadget useful to any driver. The magnetic car holder for sticking to air vent of cars. The accessory is equipped in 4 strong neodymium magnets, which protect the phone against damage during the driving. The magnet does not disturb the phone's work. There is no negative impact on the GSM signal or on the GPS operation.

Universal car holder SILK suits popular smartphones on the market. It not only keeps the device steadily but also needs a little of place. The Silk car holder is made of the highest quality materials. It is very simply in installation – just put it to the ventilation. It stands out with durable construction and 360 degree regulation of rotation, which allows optimum placing. The car holder has also got adjustment of the width – it is compatible with devices with diagonal of screen from 4.7” to 6”.

Udělejte si vlastní promítání filmů v pohodlí vaší postele.

Nebaví vás už mít na každé selfie jen svou tvář, ať je jakkoli fotogenická?